Filters
Power input type 1
ACDC
3800380
Power input type 2
ACDC
3800380
Operational Temperature
-4085
Installation
Ingress Protection
PoE Power
Mobile Wireless
Other Interfaces
Standards & Certifications
Total number of WAN ports
05
Total number of LAN ports
05

AW5601 Series

Industrial Wireless Access Point

  • Long-Range Transmission: 150m @ 30Mbps, 3km @ 70Mbps directional antenna
  • Industrial Communication mode combines advanced features (Flash Roaming, PROFINET Transparent, and VLAN tag)
  • Flash Roaming (< 25ms @ 2.4GHz / < 5ms @ 5GHz)(IC mode only)
  • Standard Wi-Fi Roaming (802.11r) with <100ms roaming time
  • Versatile operating modes for tailored connectivity (WDS bridge and AP / Client)
  • PROFINET Transparent mode for addressing NAT & PROFINET deployment
  • Engineered for extreme condition (-30°C to 70°C) with advanced EMC design
  • Streamline device management with NIMBL centralized software
  • Security compliance with EN18031 under RED Directive

Wide application AW5601 is a rugged, industrial-grade wireless access point suited for harsh conditions. Utilizing the 5GHz frequency band, AW5601 causes minimal interference with existing wireless devices, allowing easy upscaling of systems. Besides basic AP/Client modes, an additional WDS Bridge mode allows distribution from a WDS Root to multiple WDS Hybrids and wireless devices. WDS Root and Hybrids have the same wireless MAC address, SSID, and wireless channel settings, forming a larger, more flexible wireless network than simple APs. High efficiency Developed specifically with industrial automation in mind, the AW5601 features Flash Roaming and PROFINET transparency, empowering AGV/AMR applications with less latency, simpler topologies, and higher efficiency, which can be further enhanced with PoE PD support. Simply secure Security is also vital in AW5601’s design. State-of-the-art encryption complements the ability to create a virtual network among wireless clients, enabling easy and intuitive communication control between clients while imposing restrictions on data and excluding malware. And finally, AW5601 embodies a robust wireless network manager to help your network deliver optimal performance. APPLICATION CASES   Industrial Communication Mode The AW5601-IC model includes a built-in Industrial Communication Mode, which combines advanced features such as Flash Roaming, PROFINET Transparent, and VLAN Tagging. Under this mode, packet transmission over wireless also differs from regular transmission. See the below diagram for details. Features on Industrial Communication Mode: 1. Flash Roaming 2. PROFINET Transparent and over-NAT Application 3. VLAN tag 4. PROFINET QoS 5. Other Industrial Protocols (by request) Industrial Communication Mode Regular (Non-IC) Mode

Application on AGV with Flash Roaming and PROFINET Transparent

  AGVs and other mobile systems can move beyond the range of a single AP. Yet, for processes that operate in transit, the latency due to network handover can be crucial. AW5601 offers Flash Roaming that achieves handover with less than 30ms signal switching latency, causing minimal impact on operation. An AGV is a small system incorporating several controlled devices and a CPU or PLC for management. Considering the number of total devices in a site, AGV networks are usually set as small LANs, with end-device traffic undergoing network address translation (NAT/NAPT) to conserve the number of globally valid IPs. Many PLCs, however, work with PROFINET packets under a NAT/NAPT environment, which will be lost through address translation. Therefore, AW5601 supports a PROFINET Transparent mode to allow explicitly permitted PROFINET communications to pass through under a NAT/NAPT environment, achieving both efficiency and effectivity in AGV systems. * The data is the result of tests conducted in a standard lab.
Connectivity
Wi-Fi Parameter 802.11a (5GHz), 802.11g (2.4GHz) 802.11n (2.4GHz/5GHz), 802.11ac (5GHz)
Ethernet Port 1x 10/100/1000Mbps (802.3at PoE PD; optional)
Software Characteristics
Watchdog Yes
Operation Modes AP, Client, WDS, WDS Hybrid (Repeater), Industrial Communication
Wireless Security WPA/WPA2/WPA3 PSK/Enterprise
Network Security Client isolation, firewall/filtering
Alert Events E-mail, SNMP Trap
Support Protocol IPv4, TCP, UDP, ICMP,ARP, DHCP Server/Client, DNS, SMTP, SNMP vl/v2/v3, NTP, SNTP, SMTP/Syslog, HTTP/HTTPs, TFTP, NAT/NAPT/Static NAT, STP/RSTP (forwarding)
Configuration ATOP Management Utility, Web UI
Diagnostic Functions System status
Others Flash roaming, PROFINET transparent under Industrial Communication mode (IC mode)
Wireless Characteristic  
Tx / Rx 2T2R MIMO
Standard Conformance 802.11a/g/n/ac
Antenna (5GHz) 2x RP-SMA(M) connectors, 5dBi
Data Rate  
802.11a/g 54Mbps
802.11n 300Mbps
802.11ac 867Mbps
Antenna  
Gain 2.4GHz(3dBi), 5G(5dBi)
Connector 2x RP-SMA(M) connectors
Transmission Rate
Frequency Band Standard Channel Frequency (MHz)
WLAN 2.4 GHz 802.11g (20 MHz) 1–13 2412 – 2472 MHz
802.11n (20 MHz) 1–13 2412 – 2472 MHz
802.11n (40 MHz) 3–11 2422 – 2462 MHz
WLAN 5 GHz (Band 1) 802.11a 36 5180 MHz
802.11n (20 MHz) 36 5180 MHz
802.11n (40 MHz) 38 5190 MHz
802.11ac (80 MHz) 42 5210 MHz
Transmission Rate
Frequency Band Standard Power Detail(dBm)
WLAN 2.4 GHz 802.11g 18.42 dBm
802.11n (20 MHz) 18.72 dBm
802.11n (40 MHz) 18.36 dBm
WLAN 5 GHz
(Band 1)
802.11a 14.84 dBm
802.11n (20 MHz) 11.92 dBm
802.11n (40 MHz) 10.23 dBm
802.11ac (80 MHz) 15.98 dBm
Transmission Rate
Frequency Band Standard Channel Frequency (MHz)
WLAN 2.4 GHz 802.11g (20 MHz) 1–11 2412 – 2472 MHz
802.11n (20 MHz) 1–11 2412 – 2472 MHz
802.11n (40 MHz) 3–9 2422 – 2462 MHz
WLAN 5 GHz (Band 1) 802.11a 36/44/48 5180/5220/5240 MHz
802.11n (20 MHz) 36/44/48 5180/5220/5240 MHz
802.11n (40 MHz) 38/46 5190/5230 MHz
802.11ac (80 MHz) 42 5210 MHz
WLAN 5 GHz (Band 4) 802.11a 149/157/165 5745/5785/5825 MHz
802.11n (20 MHz) 149/157/165 5745/5785/5825 MHz
802.11n (40 MHz) 151/159 5755/5795 MHz
802.11ac (80 MHz) 155 5775 MHz
Transmission Rate  
Frequency Band Standard Channel Power Detail (dBm)
WLAN 2.4 GHz 802.11g 1/6/11 14.11/13.93/13.65 dBm
802.11n (20 MHz) 1/6/11 19.61/19.12/18.72 dBm
802.11n (40 MHz) 1/4/7 19.15/18.76/18.54 dBm
WLAN 5GHz (Band 1) 802.11a 36/44/48 8.63/8.23/11.24 dBm
802.11n (20 MHz) 36/44/48 10.42/12.95/15.5 dBm
802.11n (40 MHz) 38/46 10.12/15.23 dBm
802.11ac (80 MHz) 42 15.76 dBm
WLAN 5GHz (Band 4) 802.11a 149/157/165 13.74/15.74/15.56 dBm
802.11n (20 MHz) 149/157/165 19.38/20.58/20.46 dBm
802.11n (40 MHz) 151/159 18.98/19.53 dBm
802.11n (80 MHz) 155 19.11 dBm
Power Characteristics
Input Voltage 12-48 VDC
Input Current (12VDC) 0.56 A @ 12 VDC
Power Consumption Approximately 6.72W (Max)
Reverse Polarity Protection Yes
Connection 3-pin Lockable Terminal Block
Mechanicals  
Dimensions 47x110x90 mm
Installation DIN-Rail, wall mount (optional kit)
Reset Button Yes
Ingress Protection Rating IP30 Protection
Environmental Limits  
Operating Temperature -30°C to +70°C
Storage Temperature -40°C to +85°C
Ambient Relative Humidity 5% to 95%, 55°C (Non-condensing)
Regulatory Approvals
EMC EN55032: 2015/A11:2020, EN61000-6-4:2007+A1:2011 (Level) EN55035:2017/A11:2020, EN61000-6-2:2005+AC:2005 (Level) CNS15936
Radio FCC 15 15.247, FCC 15E 15.407, EN 301893, EN 300328, NCC LP0002
EMF EN 62311: 2008
Test Description Test Levels Levels
EN61000-4-2 ESD Contact Discharge Air Discharge ±4KV ±8KV 3 3
EN61000-4-3 RS Radiated (Enclosure) 10 (V/m), 80-1000 MHz 3 (V/m), 1.4-6.0 GHz 3
EN61000-4-4 EFT DC Power Port Signal Port ±1.0KV@ 5.0kHz ±1.0KV@ 5.0kHz 3 3
EN61000-4-5 Surge DC Power Port DC Power Port Signal Port Line-to-Line±0.5 KV Line-to-Earth±1.0 KV Line-to-Earth±1.0 KV 3 3 3
EN61000-4-6 CS DC Power Port Signal Port 10 V, 150 kHz-80 MHz, 80% AM 10 V, 150 kHz-80 MHz, 80% AM 3
EN61000-4-8 PFMF (Enclosure) 30A/m (r.m.s), 50Hz or 60Hz 4
Safety IEC/EN 62368-1, CNS15598-1
Shock IEC 60068-2-27
Freefall IEC 60068-2-32
Vibration IEC 60068-2-6
Warranty 5 years
RoHS Yes
Security EN18031

DIMENSIONS & LAYOUT

Ordering information
Model name Part number PoE PD support PROFINET Transparent (PROFINET packet forwarding under NAT environment) PROFINET packet forwarding (under non-NAT environment) VLAN forwarding Flash Roaming General Roaming
AW5601 1P1AW560100001G - - - - -
AW5601-P 1P1AW560100002G - - - -
AW5601-IC 1P1AW560100003G -
AW5601-P-IC 1P1AW560100004G
Model name Part number Description
UN315-1212 (US-Y) 50500151120003G Y-Type power adapter, 100~240VAC input, 1.25A @ 12VDC output, US plug, LV6
UNE315-1212 (EU-Y) 50500151120013G Y-Type power adapter, 100~240VAC input, 1.25A @ 12VDC output, EU plug, LV6
UN315-2465 (US) 50500161240002G Y-Type power adapter, 100~240VAC input, 0.65A @ 24VDC output, US plug, LV6
UNE315-2465 (EU) 50500161240012G Y-Type power adapter, 100~240VAC input, 0.65A @ 24VDC output, EU plug, LV6
WMK-454-Black 70100000000043G Black Aluminum Wall Mount Kit

Datasheet

VERSION NAME TIME SIZE DOWNLOAD
v1.3 Datasheet EN 2025-11-06 476.92 KB

Hardware Installation Guide

VERSION NAME TIME SIZE DOWNLOAD
v1.0 AW5601 Hardware Installation Guide 2024-03-29 4.40 MB

Manual

VERSION NAME TIME SIZE DOWNLOAD
v1.0 AW5601 User Manual 2024-03-07 2.15 MB

Firmware

VERSION NAME TIME SIZE DOWNLOAD
v1.4.12 AW5601 Firmware 2025-08-11 13.39 MB